Layout of the building is an important first step to get right.

A solid base for the structure is required because it's the foundation for the whole building.

Following our step by step framing guide ensures the life of your structure.

The sheathing will tie the structure together and act as a solid base for the rest of the envelope and siding.

Gently unroll the peel and stick roof to ensure a watertight system for your building.

Keep creases to a minimum and be sure to tape all the staple holes and seams.

When installing the windows, simply use the ‘nail on flange’ attached to the window frame. Make sure the window is level and square.

Always remember the first piece is the most important. Start your siding package from the bottom and slowly work up checking every 6th board is level.

A 2 degree slope is required for water to run through your newly installed gutter system. Simply let the bubble in your level sit slightly off center and you will be fine.

Installing insulation to the walls and ceiling is the next step towards energy efficiency.

The application of drywall is the best way to create a stable and smooth finish to the interior.

1 coat of drywall primer and 2 coats of top coat are a great way to finish the drywalled surface of your building.

The floating floor is easily installed due to its non glue, click together system.

Installing the trim is the last step. It'll be noticed by all your guest’s, so take your time. Miter the corners (if possible), to achieve a professional finish.